Abilene (325) 668-2226
Richardson Pump Service
Pump Service in Big Spring, TX

Abilene Local

Pump Service in Big Spring, TX

Downhole PCP specialists serving Howard County operators from Abilene since 1985.

(325) 668-2226 Get an estimate

Request an estimate

Tell us what you need

No obligation

By submitting this form you agree that we may contact you about your request and share your name and email address with partner companies for email marketing. We never share your mobile number or text message consent with third parties or affiliates for marketing or promotional purposes.

PCP Pump Service for Big Spring Operators

Richardson Pump Service Inc provides progressing cavity pump service in Big Spring, TX, covering downhole PCP installation, wellhead drive work, VFD controls, and failure analysis for oil and gas operators across Howard County. When a well goes down in the Midland Basin corridor, you need a specialist who knows the equipment and the formation, not a generalist who'll figure it out on your dime.

Big Spring sits at the eastern edge of active Permian Basin production, and the subsurface conditions here put real stress on artificial lift systems. The area's groundwater flows through ancient limestone and chalk formations, loading produced water with mineral content that accelerates wear on pump elastomers and stator components faster than operators sometimes expect. Older production infrastructure in Howard County, much of it installed decades ago, compounds that challenge. We've serviced wells across this stretch of West Texas long enough to know what the formation throws at a pump, and we size and spec accordingly. Our service territory also covers nearby communities including Rotan and Winters, so operators with acreage spread across multiple counties work with one accountable team.

What Howard County Conditions Do to a Downhole Pump

Big Spring's produced water carries the signature of limestone and chalk bedrock: high mineral loading, scaling tendency, and a chemistry that shortens elastomer life if the pump isn't spec'd for it. That's not a problem you can ignore and hope the PCP outlasts. Scale buildup on the stator bore changes the fit between rotor and stator, cuts flow efficiency, and eventually kills run life well short of design. We've seen it. We factor it into every pump selection we make for Howard County wells. Beyond mineral chemistry, West Texas temperature swings push fluid viscosity in directions that affect pump performance at both ends of the calendar. A PCP sized for summer production conditions may underperform in January when viscosities shift. Getting the selection right from the start is cheaper than pulling a pump early. That's the kind of detail a 40-year specialist catches; a generalist vendor often doesn't.

Industrial pump system with piping and valves installed at an oil extraction site at sunset.

What We Cover

Artificial Lift Services for Big Spring Wells

From downhole PCP installation to surface drive and automation, we handle the full artificial lift system.

Downhole Progressing Cavity Pumps

PCP selection, sizing, and installation for Howard County production conditions. We work across PCM, Artemis, Weatherford, and SLB Oil Lift product lines, so we're not locked to one manufacturer's catalog when your well needs a specific fit.

Wellhead Drives and VFD Controls

Surface drive selection and VFD automation that matches the downhole pump. SPOC and NETCO controls give operators real-time speed adjustment and protect the pump from run-dry and overload conditions. Drive upgrades often recover deferred production without a pull.

Failure Analysis

When a pump comes out of a Big Spring well, we don't just replace it. We examine the rotor, stator, and retrieved components to determine why it failed. That answer prevents the same failure from repeating on the next run, which is worth more than the cost of the analysis.

Fluid Level Services

Fluid level measurement gives you a clear picture of what's happening downhole before you have a pump failure on your hands. We use fluid level data to optimize pump setting depth, submergence, and production rates on Howard County wells.

Pump Maintenance Programs

Scheduled maintenance on wellhead drives, VFD controls, and surface equipment extends run life and catches problems before they become a pulling job. Operators with multiple wells in the Big Spring area keep us on a recurring service schedule for exactly this reason.

Failure Analysis

When a Big Spring Well Goes Down, Speed Matters

Call Sam Direct

No call center, no ticket queue. You reach Sam Richardson or someone on the team who knows PCP systems. We talk through what the well is telling you and figure out the fastest path to a diagnosis.

Diagnose Before You Pull

Fluid level data and surface diagnostics often tell us what failed before the pump comes out of the hole. That saves time and lets us have the right replacement equipment staged before the pulling unit arrives.

Failure Analysis on Every Pull

We examine retrieved components from every Big Spring well we service. The root cause goes back to the operator in plain language, along with a recommendation that addresses it, not just a replacement pump.

Big Spring Operators Get a Specialist, Not a Generalist

Richardson Pump Service has been in artificial lift since 1985. That's not a recent pivot into oilfield services.

40 years focused on downhole PCPs and artificial lift systems
Not a general pump shop that added oilfield work to a residential base
Multi-brand capability across PCM, Artemis, Weatherford, SLB, SPOC, NETCO, Martin
We spec the right pump for your well, not the brand we happen to stock
Direct access to Sam Richardson on every job
Owner-operated means the person accountable for the outcome is reachable by phone
Service territory spans TX, OK, NM, and Indiana
Operators with multi-state acreage work with one team, one point of contact

West Texas Service Area Around Big Spring

We run service calls throughout Howard County and the surrounding West Texas production corridor. Operators near Big Spring also find us covering:

In the field

A look at our work

A technician inspecting the internal gears and components of an industrial pump during maintenance work in a manufacturing facility.
Vertical turbine pump with electric motor installed in an oil field landscape, with an oil derrick visible in the background at sunset.
Industrial centrifugal pump assembly with electric motor, coupling, and component parts displayed alongside a wellhead installation in an outdoor water management facility.

Talk to a PCP Specialist About Your Big Spring Well

A well down in Howard County is deferred production every hour it stays down.

Direct line to Sam

(325) 668-2226

Based in Abilene, TX

Call now Request an estimate

Frequently asked questions

Question not here?(325) 668-2226

Ask Sam directly.

Does Richardson Pump Service work with operators in Big Spring and Howard County?
Yes. We service oil and gas operators throughout Howard County and the broader West Texas corridor. Big Spring sits in a stretch of Permian Basin production we know well, and we run calls out there regularly. Call (325) 668-2226 to talk through your well situation with Sam directly.
How does Big Spring's produced water chemistry affect PCP run life?
The subsurface geology around Big Spring runs through ancient limestone and chalk formations, and that shows up in produced water chemistry as high mineral loading and a strong scaling tendency. Scale buildup inside the stator bore changes the rotor-to-stator fit, reduces flow efficiency, and shortens run life. We account for Big Spring's fluid chemistry when sizing and selecting pump elastomers, which is a step a generalist vendor often skips.
Can you diagnose why a pump failed on a Howard County well before recommending a replacement?
That's standard practice for us, not an add-on. When a pump comes out of a Big Spring well, we examine the rotor, stator, and other retrieved components to determine the failure mode. Scaling, elastomer degradation, running speed mismatches, and sand production all leave different signatures. We give you the cause in plain language and a recommendation that actually addresses it, so the next run doesn't repeat the same problem.
What surface drive and VFD options do you recommend for wells in the Big Spring area?
It depends on your fluid composition, pump size, and production targets, so there's no single answer. We work with SPOC and NETCO controls and can spec a drive package that matches your downhole PCP and protects it from run-dry and overload conditions. Variable frequency drives also let you adjust pump speed as production rates and fluid viscosity change with West Texas seasonal temperatures, which is worth paying attention to in this part of the state.
How do West Texas temperature swings in the Big Spring area affect pump performance?
Fluid viscosity changes with temperature, and PCPs are sensitive to that. A pump sized for summer production conditions in Howard County can underperform in January when produced fluid viscosity increases. Running a pump that's out of spec for actual conditions puts extra load on the drive and shortens elastomer life. We factor seasonal viscosity range into our pump selection, not just the peak production target.
Do you offer fluid level testing for wells near Big Spring before recommending a pump service or replacement?
Yes. Fluid level measurement is one of the most useful diagnostic tools available before you commit to a pulling job. It tells us what's happening with submergence, pump intake conditions, and reservoir deliverability. On Howard County wells, that data often reveals whether a pump service is needed, whether the setting depth should change, or whether a surface drive adjustment can recover production without pulling the pump at all.

Related

Next step

Tell us about the job

Your name, your number and what needs doing. A person from Richardson Pump Service Inc gets back to you.

Rather talk now?(325) 668-2226

No obligation

By submitting this form you agree that we may contact you about your request and share your name and email address with partner companies for email marketing. We never share your mobile number or text message consent with third parties or affiliates for marketing or promotional purposes.